For Any Small Animal
20 Gallon Utility Drinker
Model MPD20Utility Drinker
Lift off tank provides for easy cleaning (No bolts). Also affords easy float access. Uses one model B78P valve. Adjustable. 5.5 inch (14 cm) fill opening. Fourteen inches (35.6 cm) of vertical headroom easily accommodates pigs up to 40 pounds (18.2 kg).
A. Precise Medicating. Gallon markers (from 12 to 20 gallons in 1 gallon increments). Water level easy to read through translucent tank. Markers allow for water in the trough to be at 1 inch (2.54 cm) below flood stage.
B. Six 4.5 inch (11.4 cm) openings.
C. 3/4 inch (1.9 cm) plug for complete clean out and drainage.
Mount to creep dividers or wall or Position in the center of the pen.
Model 6160Utility Pan
One-piece galvanized steel; no seams to leak; perfect for hundreds of uses.
Model WN3Nipple Waterer
Stainless steel body; plunger and spring. Brass base with 7/8” hex had and 1/2” thread. Three (3) position adjustable orifice to handle most water pressures. Easily removed domed screen.
We’re Better At The Details
Model MFD85Field Drinker
Brower gives you built-in easy-anchor notched flanges, more capacity (find another 85 gallon drinker), the boldest gallon markers and a handy fill line in the trough. If you talk to other manufacturers, ask them if their fill markers include the water in the trough and if so, at what depth. We give you precise medicating.
8 inch (20.3 cm) ID threaded cap; 1.25 inch (3.18 cm) ID port with popout plug.
Incremental 10 gallon markers and top marker showing all 85 gallons. Water level easy to read through translucent tank.
All Poly construction. High density polyethylene. Hindered amine light stabilizer, the most effective ultraviolet inhibitor. No rust, no corrosion. Takes more kicking abuse than any pigskin.
A. Two drink openings are each 15 inches (38.1 cm) high, 13.3 inches (33.8 cm) wide and 8 inches (20.3 cm) deep.
B. 304 stainless steel bite guards.
C. One 2 inch (5.1 cm) drain in each drink opening. Rounded corners. Complete cleanout and drainage.
Four notched flanges for easy anchoring. To anchor, use our optional USA Choice Stakes. Four 14 inch x .5 inch (36 cm x 1.3 cm) cuts. Order Model PS1.
Great for pastured poultry operations and flight pens.
Use a 250 watt cast aluminum de-icer in the trough or equivalent. Use a thermostatically controlled heater designed for use with polyethylene in the tank. Electrical supply card threads through port. Either option will work for you. The trough option, will do a better job with minimal drinking activity (less than say 7 head). Select the option that results in the easiest, most secure hookup for your particular operation.
For permanent installations, order optional Model 383344 stainless steel anchor package: four anchor bolts, four plates, four flat washers, four nuts (all stainless steel).
A Simple and
Model MBH5RBucket Holder
Your horse’s water will stay warmer under cold conditions and will stay cooler in the heat of summer.
The body is foam-filled poly construction — solid and indestructible. Foam insulation with an R value of 7.5 per inch fills all sides and the bottom. The most effective ultraviolet inhibitor allows years of outdoor use as well.
Our Performance One bucket holder includes a 5 gallon bucket and also includes a heat retention cover. The horse drinks from a “well”formed into the cover. Even on the coldest days, your horse should have adequate time to consume all the water you place before it. You know how much water your horse is taking.
Our bucket holder has a smooth taper to a hole in the center of the holder. This design assures total water drainage for complete and easy cleaning — no hidden standing water resulting in mosquitoes.
Model MBH5RBucket Holder
A. Pre-formed mounting holes on an open flange allow for quick and sturdy installation. Our bucket holder stands firmly on the ground as well.
B. When our Performance One bucket holder is filled with foam, a rigid fixture is used to evenly distribute material. Our sidewalls are smooth. Our overall workmanship is superb.
A Better Way
To Pack Water
Model MCN30Water Canteen
Now there’s a better way to pack water. Our canteen fits compactly in the corner of your trailer or tack room. Take it to the fair.
30 gallon capacity
Markers every 5 gallons are easily read through our translucent material.
FDA approved poly with ultraviolet inhibitors.
1) Vented top fill cap.
2) 1”x 60”nylon strap with double ring buckle. Secure tank against a fence or the side or nose of your trailer.
Model MBE30Base for Canteen
3) Lower shutoff with garden hose thread.
4) Store your hose in the 6”x 8” opening of the optional base (hose not included).
If request, please submit in the form below.